Your Freedom - HOMENEWSDOWNLOADSACCOUNTDOCS & FAQFORUMS

      User Guide
      Video tutorial
      Support
      FAQ
      Working Applications
      Install
      Using DNS mode
      Using ECHO mode
      Using PPTP
      Using SOCKS5
      IPv6/Teredo
      Browsers
      Instant Messaging
      Filesharing/Downloading
         Azureus Vuze
         Bitcomet
         Bittorrent
         Direct Connect
         eMule
         Kazaa
         Limewire (4.9)
         Limewire 4.9 Pro
         Shareaza
         µTorrent
      Games
      Internet Mail
      Multimedia Apps
      Forex trading
      FTP Tools
      Proxy Helpers
      OpenVPN mode
      Mobile connections
      Connection sharing
      External Information
      Mirrors
      Country information
      Payment methods
      Account disabled
  
Sin iniciar sesión.

Configuring Bitcomet for Your Freedom

Bitcomet is well suited for use with Your Freedom to tunnel through web proxies and restrictive firewalls. Be sure however that you configure it properly! Click on "Options", "Preferences" and follow the steps below for optimum results. To enlarge the images, simply click on them!

Connection parameters

It is important that you restrict the uplink rate to a value below the capacity of your Internet connection and your Your Freedom profile. For example, if you are behind a DSL connection that gives you roughly 380 kbit/s uplink speed and you are using BasicFreedom (256 kbit/s), set this to approximately 250/8 = 31 kB/s. If you are using FreeFreedom, 7 kB/s is a good value. Enhanced/Total users need to see what works best for them, a value of 30 or 40 kB/s appears to be reasonable.

If you are a Total user you should have a look at the Profile panel in the Your Freedom client. Choose one of the server ports assigned to you and configure it as "Listen" port. If you are not a Total user, choose "No listening mode". Yes, it will slow you down.

Configure your PC as the SOCKS proxy

In the proxy configuration panel, choose "Socks5" as proxy type, enter "localhost" as proxy server and 1080 as proxy port. Check in the YF client's Ports panel that the SOCKS port has been enabled and that it's really 1080!

Configure advanced connection options

Disable UPnP. Enable firewall port addition and removal. Enable DHT network. Then set the global maximum connections value to "a few below your limit in YF". FreeFreedom users should use 8, BasicFreedom users should use 25, EnhancedFreedom users should use 95, TotalFreedom users can get away with as much as 195. You need to stay below the maximum to have headroom for tracker connections! Also, limit the number of half-open connections to 15 (YF will allow up to 20, but you should not go to the absolute limit).

Configure server port forward

If you are a TotalFreedom user, don't forget to configure the matching server port forward in the YF client! Go to the Ports panel and add the server port forward there. The port number is the same that you've used above, on both the local and the remote end, and "localhost" is what you need to enter as address. You'll notice that server port forwards work for you when you see odd-numbered streams in the Streams panel of the YF client! (Even numbers originate from you, odd numbers originate from the server.)

 
   Acceptable Use  | Data Protection Statement